10 Types of Wall Texture to Pick For Your House


If you are in the middle of your house remodeling and thinking of something unique for your walls, then you should consider a different type of texture. You can pick a different style according to your own preference. Each type is having its own advantages and disadvantages but each type is beautiful in its own way. To help you out and make your selection easy following are the types of wall texture:

1-Crows Feet

It is created by applying a wet mud to clean the drywall and using a brush with stiff bristles. In this, the mud is pushed upward to form that resembles with crows feet. The major drawback of the design is that the dust settles in the deep grooves of the texture. In addition to this, the benefit of this texture is modern and attractive at the same time.

This was a list of ten textures that you can pick for your house walls. To get any of this for your house, you should get in touch with professional company in your area to avail the interior and exterior painting services according to you need.

2-Orange Peel

It is one of the basic wall textures but this needs some early preparations as well. You will have to sand, clean, and prime the walls before you begin the process. The name is given due to the dimpled type texture resembling with a rind of an orange.  To get this texture, mud is used and made thin using water. The mixture is applied with the compressor and sprayer along with a very thick nap of roller over the surface. Remember that you have to let the first coat dry and then apply the second coat.


This texture is generally used for the ceiling. It is best to cover the uneven ceiling tiles or other flaws in the walls which can’t be repaired easily. This style is also referred as a cottage cheese texture. It can also be applied to the walls. This texture also has an additional benefit of dampening sound because it requires a thick application. This style is inspired by the era of the 1960s to 1980s. One of the demerits related to this texture is its difficult removal. This texture is applied using a compressor and texture sprayer along with popcorn ceiling texture mix purchased.

4-Sand Swirl

This pattern may need a little practice for the perfect work. For this, you need two people for creating the style. One person will roll on perlite primer mixed with sand while the second person will create an arched pattern. The pattern is created by making a series of rounded hand motion. To get this design in your house, you should hire the interior painting contractors.


This style resembles with knockdown texture but still, there is a difference. You can create this pattern by using a skip towel for the application of mud directly to the drywall with the hands. In most of the cases, an 18-inch curved knife is applied in a very thin layer to the drywall. It will take a little practice but when you angle the knife just right the knife skips across the drywall on the surface, then you will get a lovely texture in multilayered small round circles. Remember that if the mud is too runny, then it will slide down the walls and if it is thick, then it will not spread evenly over the drywall.


The knockdown style texture can be done as a DIY project. The texture is used to add dimension and warmth to the drywall. This texture resembles with the stucco finish. For creating this pattern, you have to go through the steps used for the orange peel style just before the wall drying. You have to take the finishing knife and go over the mud to know off the bumps and smooth them over. It is a lot messier as compared to orange peel but it will create high contemporary wall texture.

7-Slap Brush

The slap brush texture consists of different variety of patterns with a brush that you push up against your mud after it is applied to the walls. You can get different patterns depending on the type of brush you are going to use. Moving on, to get this texture for your drywall, you should connect with the house painting company. The expert painters will be using the right techniques to complete the work.


This texture is a form of slap brush texture. This pattern is created using a brush to make a circle in wet mud for creating a pattern of rosebuds. The final results are achieved after a series of repeating patterns and it should be practiced on an old piece of drywall until you get the desired results. This is not an easy wall texture but this is best to hide the imperfections on the drywall surface along with great visual appearance.

9-Stomp Brush

This texture is accomplished by applying a wet mud to the drywall. You will have to get this design by using the brush with long bristles on a rounded brush. Simply push upward into the mud using rounded brush and repeat the pattern until your entire wall is textured. Keep one thing in mind that your practice is needed to get the design.

10 -Comb

It is one of the popular textures for those who are looking for highly stylized wall surfaces. This texture is created using techniques in which a line of varying width are created. One of the most common types of comb texture is a rainbow-like an image repeated at different angles on drywall. To get the shape of a rainbow arc, a worker has to use a trowel with a series of small teeth for making the lines. It is preferable to have two people working in the creation of texture as one will be using a sprayer or roller and a comber. Furthermore, one person will apply the mid and can develop the pattern on the wet mud. To get the best work done, you should contact with Cape Cod painting company expert painters for the job.